Visit Our Online Catalog
Back to our Home page About LAN-COMM Technologies Our Vendor Partners Telephone System Solutions Networking Solutions
Contact Our Staff Directions to our office Our Financial Soultions Wireless Solutions and Services Physical Security Solutions
 
We offer PHYSICAL SECURITY solutions from these and other proven manufactures
Click to visit Cisco Click to visit Extreme Click to visit Panasonic Click to visit Microsoft Click to visit Dell
 
Click to visit Time Warner Business Click to visit Leviton Click to visit Panasonic Click to visit IBM Click to visit SonicWall
See more below
 

 

  Click to visit Extreme

Discreet, all-in-one four-camera affordable surveillance solution

 

F34 Surveillance System

Get a complete, highly discreet and easy-to-install four-camera surveillance solution with remote video monitoring and management in one box. The AXIS F34 Surveillance System includes the new AXIS F34 Main Unit.

 

AXIS F34 Surveillance System offers in one box all the components needed to deploy a discreet and cost-efficient solution for multi-view surveillance. The system enables simultaneous streaming of HDTV 720p videos from four different areas through one Ethernet port. The sensor units can be recessed- or surface-mounted using the included accessories.

 

Video is stored locally on SD cards that are specifically engineered to handle continuous overwriting for lasting performance. With Axis’ Zipstream technology, the solution provides efficient video compression, enabling lower bandwidth and storage use. AXIS Camera Companion 3.10 software provides secure remote monitoring and video management from any smart device.

 

·         F34 Main Unit streams HDTV 720p videos from four AXIS F1004 Sensor Units simultaneously

 

·         Storage on two AXIS Surveillance microSDXC™ Card 64 GB

 

·         PoE or 8-28 V DC with included power supply

 

·          Surface and recessed mounting accessories included

 

 

ALL THIS FOR ONLY $799.00, professional installation also available.

 
 
Benefit from the divided camera concept
 
We have separated the IP camera’s main unit from the lens and image sensor for several reasons. The thumb-sized lens and mounting accessories allow for discreet installation on surfaces or recessed ceilings. Two different types of mounting accessories are included so you can choose the preferred mounting on site. You can also place the small, lightweight main unit at a convenient location up to 15 m (49 ft.) away from each sensor unit. All four sensor units are powered through the main unit so you do not need separate power sources for them.
 
How it works
 
1 - The four eyes of the system
2 - Main sensor unit
3 - microSDXC cards
4 - Video management made simple
F34 Diagram
 
Innovations that bring savings and efficiency
 
 

AXIS Camera Companion is optimized for use with AXIS F34 Surveillance System. The solution includes support for Axis' Zipstream technology and AXIS Video Motion Detection for maximum retention time. By utilizing these two technologies, the two SD cards - with a total of 128 GB storage - support one to two weeks of video storage.

AXIS Camera Companion also utilizes Axis Secure Remote Access for encrypted communication when viewing the system remotely. Connecting to remote cameras can be a challenge, especially when the cameras are located behind routers or firewalls. Axis Secure Remote Access significantly simplifies the installation of remote access to surveillance systems. It is automatically configured during installation, and eliminates the need for manual port-forwarding or router configuration.

 
Equipment included for a
complete system
 
  • 1 x AXIS F34 Main Unit and mains adapter PS-P T-C
 
  • 4x AXIS F1004 Sensor Units and AXIS F7315 cables
 
  • 4x AXIS F8214 Dome Accessory
 
  • 4x AXIS F8224 Recessed Accessory
 
  • 2x AXIS Surveillance microSDXC Card 64 GB
 
 
The PC-client for AXIS Camera Companion is free for download. The mobile viewing apps for AXIS Camera Companion for both iOS and Android can also be downloaded for free
 

 

 

 

View the F34 Surveillance System Video

 

 

 

 

View the F34 Surveillance System Datasheet - 1.1 MB

 

 

 

 

View the F34 Surveillance System Slide Show – 4.5 MB

 

 

 

 

View the F34 Main Unit Datasheet – 223 KB

 

 

 

 

View the F34 Main Unit User Manual – 1.1 MB

 

 

 

 

View the F34 Main Unit Installation Guide – 2.13 MB

 

 

 

    Request more information
     
 
See more Axis solutions

 


     
FaceKey biometric security solutions include access control, time and attendance and muster stations. These cutting-edge family of products have been tested and proven in companies like yours to protect your assets and lower your operating costs. In fact, we rely on FaceKey systems to protect our own assets.
     
     
 
 
 
 
     
FaceKey products provide small business owners many ways to save. You’ll save on cards, keys and re-keying, because none are required. And FaceKey products are built to run on common networks. So, if you purchase one product and add others later, they can all be easily and economically integrated helping to reduce and minimize instalation costs. And no matter which of the Facekey family of products fits your needs, they can all be easily managed by your IT department.
     
 
Shown below are just a few of the
FaceKey product solutions.
     
    The EntryGuard Access Control System
     
 
The EntryGuard™ Access Control system is easy to install and operate. Built on a server-client architecture that runs over IP networks, FaceKey’s access control system is easy to install and operate and requires minimal training. Data collected at each door is automatically uploaded to the server, while configurations made at the network level (such as the addition or deletion of a user) may be selectively distributed to each door unit. All communications and fingerprints are encrypted.
 
     
    Time and Attendance System
     
 
With FaceKey’s Time and Attendance system, you get versatility, accuracy and remarkable cost efficiency. FaceKey’s EntryGuard™ Time and Attendance system is a paragon of cost efficiency. Payroll administration is cut way back. Clerical errors are reduced. “Buddy punching” is eliminated. Accurate work time is ensured. In fact, our EntryGuard system is so efficient, you’ll realize your ROI in less than a year.
 
     
    MusterGuard System
     
 
Deploy your emergency resources more effectively with FaceKey’s MusterGuard™ system. In the event of a crisis requiring evacuation, the MusterGuard™ system will deliver a list of persons missing—in real time. Then, First Responders and managers can utilize the report to deploy their emergency resources more effectively. A report with the last location of the missing person(s) is available in minutes rather than hours.
 
   
    Face or Fingerprint Recognition System
     
 
Face or Fingerprint recognition: The ultimate security identification. If security, safety and crisis management are critical to your company, you need a truly reliable identification system. That means face or fingertip recognition from FaceKey. The face and finger are indisputable identifiers. What’s more, they can’t be lost, stolen, borrowed or left at home.
 
   
     
     

 
 
     
     
Axis offers the market’s broadest and most consistent range of high-quality network cameras.
 
Based on open IP standards, Axis network cameras connect to any kind of IP network, including the Internet, and enable remote viewing and recording from anywhere in the world. They also provide advanced video analytics features, such as motion detection, audio detection and tampering alarm.
 
 
A wide portfolio of products for professional IP video surveillance.
 
Whether you are looking for a video surveillance solution to secure the safety of people and places, or to remotely monitor property and facilities, Axis can meet your needs.
 
You benefit from an extensive selection of network cameras – several with HDTV/Megapixel resolution – which come in different forms to fully meet your requirements.
 
 
Shown below are just a few of the
AXIS product solutions.
 
AXIS P14 Series of cost-effective Outdoor-ready, bullet-style HDTV network cameras
 
The AXIS P14 Network Cameras constitute a series of outdoor-ready bullet-style cameras. These cameras are ideal for 24/7 video surveillance, in exposed outdoor areas such as parking lots, service-stations and for general indoor surveillance purposes where a compact camera is needed.

AXIS P14 Series offers models with exceptional image quality from 1080p resolution up to 4K Ultra HD. The cameras support P-Iris control for optimal image clarity and includes integrated features for efficient and reliable video surveillance such as built-in IR, remote zoom and focus, a built-in slot for microSD/SDHC/SDXC memory cards and I/O connectors for interfacing with external devices.
 
AXIS P14 Series Network Cameras datasheet
AXIS P14 Series Installation Guide
AXIS Network Video Product Guide
 
 
     
 
 
 
AXIS Q1755-E Outdoor-ready HDTV network camera with zoom and H.264
 
The outdoor-ready AXIS Q1755-E is a day and night HDTV network camera, designed for securing areas where high-quality identification is needed, for example, at casinos, passport controls, airports, railway stations and for perimeter surveillance. It is IP66-rated and features Axis’ unique Arctic Temperature Control for start-up and operation of zoom cameras in temperatures as low as -40 ºC (-40 ºF).
 
AXIS Q1755/-E Network Cameras datasheet
AXIS YP3040 Pan-Tilt Motor datasheet
AXIS Q1755/-E Installation Guide
AXIS Q1755/Q1755-E - User Manual
 
 
     
   
     
  AXIS P1346 Network Camera with Superb HDTV quality and multi-view streaming in any environment
   
AXIS P1346 is a 3-megapixel day and night network camera that offers outstanding video performance, including full frame rate HDTV 1080p (1920x1080) in compliance with the SMPTE 274M standard in resolution, color representation, 16:9 aspect ratio and frame rate. It supports multiple H.264 and Motion JPEG streams simultaneously. AXIS P1346 additionally supports digital pan/tilt/zoom and multi-view streaming, where the full view and several areas cropped from the full view can be streamed simultaneously.
 
 
AXIS P1346 Network Cameras datasheet
VT Vandal-Resistant Housing datasheet
AXIS P1346 Installation Guide
AXIS P1346 - User Manual
AXIS P1346 Firmware version 5.40.9.2 23.30Mb BIN
 
 
     
   
     
 
 
 
 
 
 
 
 
  AXIS M3005-V Fixed mini dome Network Camera with HDTV performance
   
 
The palm-sized AXIS M3005-V Network Camera is an affordably priced, easy-to-install indoor fixed dome that supports HDTV 1080p and 2 MP resolution. It is ideal for retail stores, hotels, schools, banks and offices. The M3005-V is vandal- and dust-resistant, and designed for quick and flexible installation. With a 3-axis camera angle adjustment, the cameras can be mounted on walls or ceilings, and images can be easily leveled. No focusing is required as the camera comes focused at delivery. The M3005-V offers a horizontal viewing angle of 118°. It supports Axis’ Corridor Format for vertically oriented video streams of areas such as corridors, hallways or aisles.
 
 
 
 
 
 
 
Skins are available in different color options to suit interior design
 
To enable the camera to better blend in with the environment, skins are available in different colors. AXIS M3005-V also comes with a 2 m (6.6 ft.) network cable and are powered using Power over Ethernet (IEEE 802.3af), which simplifies installations.
 
 
 
Intelligent video
 
The camera’s support for AXIS Camera Application Platform enables the installation of intelligent video applications such as people counting.
 
Convenient video management
 
AXIS M3005-V offers a convenient video management solution with its built-in micro-SDHC memory card slot for edge storage and support for software such as the complimentary AXIS Camera Companion. Video streams can be encoded in H.264 and Motion JPEG.
 
 
AXIS M3005-V Network Camera datasheet
AXIS M3005-V Installation Guide
AXIS M3005-V - User Manual
 
 
     
   
     
  AXIS P1214-E Miniture HDTV Network Camera for discreet outdoor surveilance
   
 
Unique design concept, the unique form factor and small size of the sensor unit enables flush mounting at places where a concealed application is required. AXIS P1214-E is ideal for compact and covert surveillance in stores, architectural buildings, hotels, offices, banks and ATMs. The AXIS P1214-E Network Camera provides full frame rate HDTV 720p (1280x720 pixels) video in H.264 and Motion JPEG.
 
The innovative design concept of AXIS P1214-E comprises a main unit and a separate sensor unit, enabling it to be mounted up to 8 meters (26ft.) apart.
 
 
 
AXIS P1214-E Network Camera datasheet
AXIS P1214-E Installation Guide
AXIS P1214-E - User Manual
 
 
     
   
     
 
 
  AXIS 214 PTZ Day & night Network Camera with pan/tilt/zoom and 2-way audio
   
 
High quality color camera AXIS 214 PTZ Network Camera is a high performance camera for professional surveillance and remote monitoring. It combines a high quality color camera with the flexibility of remote pan/tilt/zoom through operator control.
 
Remote pan/tilt/zoom operations The 18x optical motorized lens with auto focus makes it possible to zoom in on a small or distant object with exceptional clarity. The operator can easily track objects of interest with fast and high precision PTZ control using a mouse or joystick.
 
  • High-resolution camera with 704x576 pixels PAL, 704x480 NTSC
  • Built-in motion detection and powerful event management
  • Network security using multiple user access levels, IP address filtering, HTTPS encryption, IEEE 802.1X authentication
  • Supports Quality of Service (QoS) which helps secure the necessary bandwidth for streaming video and control commands over a network
  • Supports Internet Protocol version 6 (IPv6) in addition to IP version 4 (IPv4)
 
 
AXIS 214 PTZ Network Camera datasheet
AXIS Pendant Dome
AXIS T95A Series Dome Housing
AXIS VT DBH24K Dome Housing
AXIS 214 PTZ Installation Guide
AXIS 214 PTZ - User Manual
 
 
     
   
     
  AXIS T8310 Video Surveillance Modular Control Board for professional camera and video management.
   
 
AXIS T8310 Video Surveillance Control Board is a modular system with three separate joystick, keypad and jog dial units. The modular system allows the user to choose a simple solution such as only the joystick, or a complete solution with all three modules for both camera and video management. AXIS T8311 Video Surveillance Joystick gives responsive and accurate control of all Axis PTZ and PTZ dome network cameras. With AXIS T8312 Video Surveillance Keypad the user quickly navigates between workspaces, cameras, views and PTZ presets. AXIS T8313 Video Surveillance Jog Dial is used for navigating through recorded video.
 
All three units are constructed in durable materials and have a professional look and finish that adapt to a surveillance room design. The units are designed for both left hand and right hand use. AXIS T8311 Joystick is a 3-axis joystick with a turn knob and six application defined hotkeys. AXIS T8312 Keypad has ten application defined hotkeys and 12 preset keys. AXIS T8313 Jog Dial also has six application defined hotkeys as well as a navigation dial.
 
The units are easy to install with USB interface. When using the complete AXIS T8310 Control Board the modules are interconnected with the AXIS T8312 Keypad serving as a USB hub. AXIS T8310 Control Board is supported by AXIS Camera Station version 3.30 or higher.
 
 
AXIS T8310 Control Board datasheet
AXIS T8310 - User Manual
 
 
     
   
     
    AXIS Camera Management Efficient management tool for your Axis network video products.
     
 
AXIS Camera Management is a powerful and efficient installation and management tool, specially designed to be used with Axis network video products. Using standard network protocols and methods, the tool can automatically find and configure devices, set IP addresses, show connection status, manage firmware upgrades and camera applications for multiple devices.
 
 
AXIS Camera Management Software datasheet
AXIS Camera Management Software version 3.10.083
  Requirements: Windows 8 Pro, Windows 7 Professional, Windows Vista Business, Windows XP Professional (server and/or client), Windows 2012 Server, Windows 2008 Server R2, Windows 2008 Server, Windows 2003 Server.
   
AXIS Management Software Release notes
 
 
     
   
     
    AXIS IP Utility (version 2)
   
AXIS IP Utility (version 2) discovers and displays Axis devices on your network. The application is also used to manually set a static IP address and to access the unit's home page for further configuration.
 
 
Download AXIS IP Utility 2 (version 2.21)
  System requirements: Windows NT 4.0 / 2000 / XP/ 2003 Server / Vista / Windows 7 Professional
   
  Limitations: The Axis network video product and the client computer must be on the same subnet/network segment. In addition, with Windows Vista and Windows 7, AXIS IP Utility must be run once with administrator rights in order to discover cameras.
 
 
     
  AXIS Product Selector Page
   
 
Axis is the world leader in network video and offers a wide portfolio of products for professional IP video surveillance. To view and compare all the AXIS products click on the link below to visit the PRODUCT SELECTOR page.
 
 
http://www.axis.com/products/video/selector/index.php
     
   
     

     
 
 
         
LAN-COMM Technologies is now offering a wider range of IP and Analog cameras from Panasonic. These products include but is not limited to the products shown below.
 
 
 
 
 
BB-HCM527A BB-HCM547A WV-ST162 WV-ST165 WV-SW172
 
WV-SW175 WV-SW174W WV-SF132 WV-SF135 WV-SC384
 
 
         
         
WV-CF284 WV-CF294 WV-CF324 WV-CF504 WV-CL930
 
WV-CL934 WV-CP290 WV-CP294 WV-CP500 WV-CP504
 
WV-CS574 WV-CS954 WV-CW384 WV-CW504F WV-CW504S
 
 
 
BB-HCS301A BB-HGW700A BB-HNP17A WV-CU650 WV-CU950
 
 
         
         
       
BB-HCA10A        
 

 
 
Call us today for a complete system design to fit your specific needs. (210) 681-2505 or send us an email 
Copyright © 2015 LAN-COMM Technologies, Inc. - All rights reserved.